ICOM IC7300 Firmware Update 1.11 to 1.14
Showing posts with label IC-7300 HF/50/70MHz Transceiver. Show all posts
Showing posts with label IC-7300 HF/50/70MHz Transceiver. Show all posts
IC-7300 With No-Fill Spectrum
IC-7300 With No-Fill Spectrum
Another way of changing the display to suit.
Another way of changing the display to suit.
Icom IC-7300 HF/50mhz transceiver complete review demo
Icom IC-7300 HF/50mhz transceiver complete review demo
Icom IC-7300 review
Icom IC-7300 review
Icom IC-7300 is the first direct sampling SDR (software defined radio) available from one of the "big three" japanese manufacturers. This helps it bring a whole new level of performance at an accesible price point, a much more flexible configuration and a set of features only seen in top-of-the line equipment. Real-time panadapter or fully customizable filters are just the tip of the iceberg.
Sure, amateur equipment has been using for a long time various levels of digital signal processing (DSP), but usually this was done in the last part of the receive chain, where it mostly impacted audio quality and not receiver performance. Moving to a direct-sampling SDR architecture means the signal coming from the antenna is directly transposed to the digital domain and instead of all the previously familiar receiver stages (such as mixers, filters, demodulators etc) we are using mathematical formulas applied to the data stream. The advantage of this approach is it eliminates all problems related to real-world hardware receivers (noise, distorsion, losses, imperfections, limitations etc) and opens up a new world on how you can use or visualize RF signals. Goodbye unwanted mixing products, AGC non-linearity, IF chain IMD or filter blow-by. You want a 200Hz to 2250Hz SSB filter ? Just go into the menu, customize it to that value and see how that carrier at 2260Hz simply doesn't get trough; yes, filter width and shape is just a matter of settings, leaving it all to mathematics to carry it out. Basically, the only part that limits the receiver performance is the Analog-Digital Converter (ADC) that samples the RF signal, and those are already very good.
Icom IC-7300 is the first direct sampling SDR (software defined radio) available from one of the "big three" japanese manufacturers. This helps it bring a whole new level of performance at an accesible price point, a much more flexible configuration and a set of features only seen in top-of-the line equipment. Real-time panadapter or fully customizable filters are just the tip of the iceberg.
Sure, amateur equipment has been using for a long time various levels of digital signal processing (DSP), but usually this was done in the last part of the receive chain, where it mostly impacted audio quality and not receiver performance. Moving to a direct-sampling SDR architecture means the signal coming from the antenna is directly transposed to the digital domain and instead of all the previously familiar receiver stages (such as mixers, filters, demodulators etc) we are using mathematical formulas applied to the data stream. The advantage of this approach is it eliminates all problems related to real-world hardware receivers (noise, distorsion, losses, imperfections, limitations etc) and opens up a new world on how you can use or visualize RF signals. Goodbye unwanted mixing products, AGC non-linearity, IF chain IMD or filter blow-by. You want a 200Hz to 2250Hz SSB filter ? Just go into the menu, customize it to that value and see how that carrier at 2260Hz simply doesn't get trough; yes, filter width and shape is just a matter of settings, leaving it all to mathematics to carry it out. Basically, the only part that limits the receiver performance is the Analog-Digital Converter (ADC) that samples the RF signal, and those are already very good.
ICOM IC-7300 SWR Meter graph function how to
ICOM IC-7300 SWR Meter graph function how to
Here`s a quick and basic "how to" use the 7300's built in SWR graphing meter.
I think it was an oversight in the manual? Anyway a picture is worth 900 words [-GST] Pretty cool feature. I can imagine all around the world there's going to be 13 short carriers across the spectrum.
Just make sure you turn your power right down to say 5watts for starters. [FYI you dont have to put the radio in AM or FM to get a carrier]
Here`s a quick and basic "how to" use the 7300's built in SWR graphing meter.
I think it was an oversight in the manual? Anyway a picture is worth 900 words [-GST] Pretty cool feature. I can imagine all around the world there's going to be 13 short carriers across the spectrum.
Just make sure you turn your power right down to say 5watts for starters. [FYI you dont have to put the radio in AM or FM to get a carrier]
ICOM IC 7300 VS YAESU FT 991
ICOM IC 7300 VS YAESU FT 991
ICOM IC 7300 VS YAESU FT 991 - 40 mt Band - Low Propagation - Hi QRM
ICOM IC 7300 VS YAESU FT 991 - 40 mt Band - Low Propagation - Hi QRM
Innovative IC-7300 HF/50/70MHz Transceiver launched at Tokyo Ham Fair 2015
Icom Inc. had a huge amount of interest on its stand at last weekend’s Tokyo Ham Fair 2015 with the unveiling of the IC-7300 HF/50/70MHz Transceiver.
The launch, which caught most people by surprise, saw the manufacturer introduce a new base station transceiver incorporating the latest RF direct sampling system, a first for an Amateur radio transceiver*.
The IC-7300 transceiver, an aesthetically, attractive looking base station, features a 4.3 inch touch screen colour TFT LCD screen with a high performance real time band scope.
A first for an Amateur radio transceiver, the IC-7300 uses a RF Direct Sampling System, a technology normally seen in Software Defined Radios. RF signals are mostly processed through the FPGA (Field-Programmable Gate Array), rather than by physical devices enabling high performance real-time spectrum scope in a compact body.
The IC-7300 includes a built-in integrated wide-frequency Automatic Antenna Tuner making ideal for field operation. The radio provides 100 watts output power on HF/50MHz bands and 50 watts on 70MHz (European versions only).
Icom Inc. has produced a pre-release leaflet for the IC-7300 which you can download from this page. This information is preliminary and a full document will be made available nearer to the product’s launch.
So far, we have no details about pricing and availability.
To download this leaflet, click on the link on the side bar of this page.
*Researched by Icom Inc, among major Amateur radio manufacturers
Ian Lockyer
Marketing Manager
Icom UK Ltd
The launch, which caught most people by surprise, saw the manufacturer introduce a new base station transceiver incorporating the latest RF direct sampling system, a first for an Amateur radio transceiver*.
The IC-7300 transceiver, an aesthetically, attractive looking base station, features a 4.3 inch touch screen colour TFT LCD screen with a high performance real time band scope.
A first for an Amateur radio transceiver, the IC-7300 uses a RF Direct Sampling System, a technology normally seen in Software Defined Radios. RF signals are mostly processed through the FPGA (Field-Programmable Gate Array), rather than by physical devices enabling high performance real-time spectrum scope in a compact body.
The IC-7300 includes a built-in integrated wide-frequency Automatic Antenna Tuner making ideal for field operation. The radio provides 100 watts output power on HF/50MHz bands and 50 watts on 70MHz (European versions only).
Icom Inc. has produced a pre-release leaflet for the IC-7300 which you can download from this page. This information is preliminary and a full document will be made available nearer to the product’s launch.
So far, we have no details about pricing and availability.
To download this leaflet, click on the link on the side bar of this page.
*Researched by Icom Inc, among major Amateur radio manufacturers
Ian Lockyer
Marketing Manager
Icom UK Ltd
Subscribe to:
Posts (Atom)